Calibrate Softball AI and return to Manual
Assign the camera roles, check calibration in Observe, and keep a manual cut available.
General guidance · Check the controls available in your installed app.
Assign cameras and verify field points
In Pilot, set the pitching tile to CF (Pitch) and the wide tile to Wide (Home). Open
AI Setup → Calibrate, then choose CF (Pitch) when both views are available. Review the detected rubber and plate marks and tap the picture to correct them. Set Rubber to plate to the actual distance for this field. Pilot starts at 40 ft. Follow the on-screen steps to save the calibration.
Test in AI Observe
In Pilot, select AI Observe under Director Mode. Run a practice pitch and check
AI Workflow for the cues. You still choose the camera in Observe. If cues are missing or late, check that both feeds are moving and the rubber and plate still line up with the reviewed points.
Switch back to Manual when needed
If AI Auto is present, treat it as experimental and rehearse away from the live broadcast. A camera tap can override a pending automatic cut. For continued manual operation, choose Manual under Director Mode, then tap the camera you want on Program. Confirm the selected picture before relying on it.