Find a missing camera or recover its picture
Check discovery, Local Network access, and the feed before changing camera settings.
General guidance · Check the controls available in your installed app.
Check the network and reopen discovery
Keep the camera and iPad on the same local network. On Wi-Fi, check the network name on both devices and avoid guest Wi-Fi that isolates devices. In Pilot → Devices → Cameras, tap
Search for cameras. If troubleshooting Spotter discovery, check that both devices are on the same local network and use Find Pilot in Send to Pilot when that panel is available.
Check Local Network access
If Pilot shows
Open app settings in Devices, tap it and enable Local Network. You can also check Settings → Privacy & Security → Local Network on the affected iPad or iPhone. Return to the app and run the same search. If Pilot still cannot find an RTSP camera and you already know its address, open Devices → Cameras → Connect by address → RTSP camera · includes VM33, enter the camera’s local IP address, and tap Check Camera Address
.
Recover a camera that is listed
In Pilot’s Devices screen, tap
Reconnect on the affected camera card. Wait for a moving preview and a codec and resolution badge. Tap the live picture to expand it. To add the camera, return to its device card and tap
Add to Pilot. If the tile is already in Pilot, tap
Reconnect in the center of the preview when no picture is showing. Keep a healthy angle on Program while troubleshooting. If a Mevo is in use elsewhere, coordinate with that operator before reconnecting.