Review saved calibration and correct field marks
Check saved marks after a camera moves and adjust the view while placing a point.
General guidance · Check the controls available in your installed app.
Check the saved marks first
Open
AI Setup and go to Calibrate. Choose the view for the camera you want to check. On a live picture that matches your saved camera setup, compare the saved marks with the field. If the points have shifted, tap Re-calibrate. During a stream, consider putting the wide camera on Program before changing the pitching view.
Place or correct a point
Pinch to zoom and pan with two fingers to reposition the picture. Use a single tap to mark the point, then use the current step’s Accept button. Check the pitching rubber, rear tip of home plate, and both front corners as prompted. Confirm Rubber to plate for this field. A guide outline can help frame the camera. Use visible field landmarks for the marks.
Save what you confirmed
Confirm each mark you want to keep, then tap Save. The optional 3 ft exit reference uses both ends of the same upright reference. If you skip it, check the exit-speed calibration status before enabling Exit Velo. Reopen
AI Setup and compare the saved points with the current picture before relying on the graphics or AI Auto.