All guides

Inning Pilot / Inning Pilot Spotter · Connections

Choose a tri-band router for a 45 W USB-C PD source

Match the router’s voltage and current requirements, not just the wattage on the charger.

General guidance · Check the controls available in your installed app.

Check the output profile

These are specification-based candidates, not bench-verified compatibility with every third-party charger or battery. A USB-C port marked 45 W must supply the required voltage/current on that port. Check the profile label, use a USB-C-to-USB-C cable rated for the output, and allow for multi-port power sharing. The router draws what it negotiates; a 45 W source does not force 45 W into a 27 W device. Keep power compatibility separate from permission to operate outdoors.

eero Pro 6E — Wi-Fi 6E

S010001 / S010011. Tri-band 2.4 / 5 / 6 GHz, with a 27 W USB-C supply. Look for 9 V at 3 A from the PD source. eero lists its own 45 W adapter as compatible. This is the strict Wi-Fi 6E entry; the remaining options use Wi-Fi 7. Indoor equipment.

eero Pro 7 — Wi-Fi 7

ME10001 / ME10111. Tri-band 2.4 / 5 / 6 GHz and a 27 W USB-C supply. Look for 9 V at 3 A. eero lists its 45 W adapter as compatible. Can join an existing eero mesh. Indoor equipment.

eero Max 7 — Wi-Fi 7

V010001. Tri-band 2.4 / 5 / 6 GHz and a 45 W USB-C supply. Match the eero 45 W PD adapter’s 15 V at 3 A profile; do not assume a charger’s total 45 W label guarantees that output. Can join an existing eero mesh. Indoor equipment.

eero PoE 7 — Wi-Fi 7

NV01 / NV14111; regional/hardware labels vary. Tri-band 2.4 / 5 / 6 GHz. eero documents 27 W USB-C power as an alternative to PoE+. A matching 45 W PD source must provide the 9 V at 3 A profile of the 27 W eero supply. The USB-C power adapter is sold separately. Indoor wall/ceiling equipment.

GL.iNet Slate 7 Pro — Wi-Fi 7

GL-BE10000. Tri-band 2.4 / 5 / 6 GHz. Published USB PD inputs: 5 V / 3 A, 9 V / 3 A or 12 V / 2.5 A; prefer 9 V / 3 A or 12 V / 2.5 A when using USB peripherals. Rated consumption is below 20 W without USB accessories. A suitable 45 W PD source can cover these profiles. This is a separate router platform, not a drop-in eero mesh node. Check operating-mode and regional 6 GHz support.

GL.iNet Mudi 7 — Wi-Fi 7

GL-E5800, including GL-E5800NA. Tri-band 2.4 / 5 / 6 GHz with a built-in battery. Current specifications list USB PD/PPS input over 5–12 V, up to 30 W. Select a 45 W source with compatible PD/PPS output; the wattage alone does not establish full-rate operation or charging. This is a separate mobile-router platform, not an eero mesh node. Check regional radio and outdoor-use authorization.

Choosing for your setup

For an existing eero network, stay with compatible eero nodes rather than expecting another manufacturer’s router to extend eero mesh. For a new portable setup, the Slate 7 Pro is a USB-C candidate to evaluate separately. Standard Slate 7 and many other USB-C travel routers are dual-band without 6 GHz, so check the exact model. None of this power list is an approval for an outdoor 6 GHz installation.

Manufacturer and reference sources